Huawei P40 Pro ELS-NX9, ELS-N04 Test Point, Remove Bypass FRP
Huawei P40 Pro was launched in the year 2020 which came out of the box with Android 10. It is powered by Kirin 990 5G processor. But if you’re one of the Huawei P40 Pro ELS-NX9, ELS-N04 users and want to find out Test Point to Remove FRP lock, Huawei ID, User Lock, and Firmware Flashing then follow this article.111
Here we’ll gonna share how you can find out the Huawei P40 Pro ELS-NX9, ELS-N04 Test Point, or get into the Download Mode (Emergency Download Mode) so that you can perform multiple advanced level tasks by yourself. You can basically use this test point in any box-like tools such as the Sigma Key, MRT key tool, UFI, UMT, Medusa. All you need is to just shoot the gold point to the ground and then connect a USB cable.
Here we’ll gonna share how you can find out the Huawei P40 Pro ELS-NX9, ELS-N04 Test Point, or get into the Download Mode (Emergency Download Mode) so that you can perform multiple advanced level tasks by yourself. You can basically use this test point in any box-like tools such as the Sigma Key, MRT key tool, UFI, UMT, Medusa. All you need is to just shoot the gold point to the ground and then connect a USB cable.
- The process will begin to remove the firmware protection, also called FRP lock.
- After successfully removing the Huawei ID, you have to set the testpoint OFF. This will again revive the phone from factory mode to normal phone mode.
- Select the Serial Port as USB (autodetect), Authorize with device model, and then tap the Software Testpoint on/off.
- After completing the process, your device will be back to normal
